Can I program Nissan Smartkeys?
3817 Views 6 Replies Latest reply: 2014-07-01 15:09:58
-
Level 2
(14) points
-
Level 10
(7890) points
Yes you will need a 4 digit pincode which is generated from the pinread in nats system
go to www.keytechtools.com,register then click on bcm code and input the pinread,you
will be given an old and new pin code, after 2008 its most likely to be the new
code.good luck. -
Level 2
(14) points
Hello ede65, and thanks for your reply.
I registered with keytechtools, and do indeed get the bcm code converter, but the field is dead. I cannot enter any numbers. I thought it might take a while to 'come alive', but it has been over 24 hours... can you check on your end and see if the link is broken?
I do really appreciate your response to my problem!
oldcrowe -
Level 10
(7890) points
its working fine on my end,within 15 seconds i get a code make sure your using internet explorer let me know. -
Level 2
(14) points
Yay! Internet Explorer was the key! I was using Mozilla...
Thanks bunches!
oldcrowe -
Level 1
(3) points
I have a program called "Nissan Super Code". If you have the BCM part number, which is available to be read from the scanner, it generates a pin code. Have you tried/used this program before? -
Level 10
(7890) points
yes i have it, you generate a code from the bcm pin read,it works fine for the old codes up to about 2008,after that year the new code is required, the website i provided will give you both old and new codes good luck.
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities